Vulcan-Hart VHG-C Series Operation Manual page 28

VHG SERIES GAS FRYERS
INSTRUCTIONS TO REMOVE & REPLACE KLEENSCREEN PLUS® FILTER ENVELOPE
FOR ABSOLUTE FILTRATION & MAXIMUM FLOW RATE WE RECOMMEND YOU CHANGE YOUR FILTER
ENVELOPES AT EVERY OIL CHANGE (10-14 DAYS DEPENDING ON OIL USAGE).
Hot oil and parts can cause burns. Use care when operating,
cleaning and servicing the fryer.
Step 1
Discard all oil from the filter vessel. When the filter pan is empty, use a spatula
and scrape off all debris left on the filter envelope and in the filter pan.
Step 2
Unscrew the suction tube from filter by first turning the bottom handle fitting
counter clockwise untill completely loosened. Next, turn the top handle fitting
counter clockwise until completely loosened.
Step 3
Remove the closing clip.
Step 4
Remove the envelope insert,wash insert with hot water and dry thoroughly. The
envelope insert is dishwasher safe. Place the insert into a new KleenScreen
PLUS® Filter envelope.
Do not wash the fabric envelope.
Step 5
Slide the envelope insert Insert into the fabric envelope making sure that the
holes line up. Fold over the open end of the envelope and place closing clip on
– hinge over and firmly press clip all the way down to secure and seal filter
assembly. Make sure that the folded end is face down. Attach the suction tube
assembly by first tightening the top handle fitting and then tighten the bottom
handle fitting.
Do not use tools. Hand tighten only.
Step 6
Position the filter screen assembly into the suction tube clip in the filter pan,
positioning the filter screen assembly flat on the bottom of the filter pan. Align
the tube so that the end of the tube tube engages the oil receptacle fitting each
time the drawer is opened and closed.
VULCAN F-47678 Rev. A (3-20)
-28-