Setting Up Your Printing Preferences - Rimage Autostar II User Manual

Rimage Autostar II and Protégé II
2. Unload the discs.
a. Open the Producer II front door.
b. To rotate the carousel and place a bin in position to remove discs, press the operator
button.
c. Remove the discs from the bin.
d. Repeat steps b - c until the required bins are empty.
e. Close the Producer II front door.

Setting up your printing preferences

Printing Preferences allows you to set up and run your Producer II to produce the best possible
label on your discs. Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for
specific printing preferences instructions.
6 110629_F