Set Your Printing Preferences; Access Print Preferences; Access Print Properties; Layout And Paper/Quality Preferences - Rimage Prism III User Manual

Set your Printing Preferences

Set your Printing Preferences
Important: Unless otherwise indicated, all Windows navigation statements
are Windows 7 paths. Other Windows operating systems' navigation may
differ slightly.

Access Print Preferences

1. Select: Start > Devices and Printers. The Devices and Printers dialog box
opens.
2. Right-click on Rimage Prism III.
3. Select Printing preferences from the dropdown list. The Rimage Prism III
Preferences window displays.

Access Print Properties

1. Select: Start > Devices and Printers. The Devices and Printers dialog box
opens.
2. Right-click on Rimage Prism III.
3. Select Printing properties from the dropdown list. The Rimage Prism III
Properties window displays.

Layout and Paper/Quality Preferences

Options found under the Layout and Paper/Quality tabs typically do not
need adjustments. Rimage Technical Support will identify when these
settings need adjustment and can assist with adjusting the settings found
under these tabs.
2001809_A

Change Masking Settings

The Rimage CD Designer software is intended to print on 120mm optical
discs and will mask out areas that are not printable, such as inside the disc
hole and outside the outer circumference.
Some discs do not have a suitable print coating around the stacking ring.
Change the mask settings to accomodate printing on these discs.
For more information visit rimage.com/support
Masked (no print)
Areas
Masked (no print)
Areas
9