Technical Support And Product Updates; Safety Information; Safety Precautions - Rimage Autostar II User Manual

Rimage Autostar II and Protégé II

Technical support and product updates

Support for the Producer II is available through your authorized reseller.
Important! Register your Producer II online or complete and return the registration card so
Rimage can notify you of upgrades as they become available.

Safety information

This manual and the indications on the product allow proper and safe operation. The indication
marks below help protect you and other persons from injury, and equipment from damage.
Important! Any equipment that has certain components using AC line voltage, or in some
cases low DC voltages, such as power switches, power supplies, fuses, fans, non-stepper
motors, must be replaced with Rimage–approved components to maintain the safety
approval issued by UL.
Warning! According to ANSI (American National Standards Institute) standards, a wa
used to indicate situations th
maintaining the equipment.
Caution: Indicates that failure to observe this guid
equipment, product, s

Safety precautions

To ensure safety, please read the precautions in the
meaning before using the equipment.
Caution: For continued protection against risk of fire, replace the fuse only with same type
and rating. An authorized technician should perform all service procedures.
Caution: Use only the supplied AC powe
For applications outside North America, refer to the nearest Rimage office for assistance
selecting a locally approved power cord.
Caution: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiant exposure.
Warning! The laser beam used by the CD Recorder is a Class 1 laser. Do not attempt to
open the recorder. An authorized technician should perform all service procedures.
Warning! The laser beam used by the DVD-R recorder is a Class 2 laser and can be harmful
to the eyes. Do not attempt to open the recorder. An authorized technician should perform all
service procedures.
12
at could result in bodily injury to personnel operating or
oftware, or data.
r cord, or use a safety agency approved power cord.
eline could result in loss or damage to the
User Guide and familiarize yourself with their
rning is
in
110629_F