Table of Contents
Advertisement
Available languages
Available languages
Rimage PrismPlus! User Guide
Set your Printing Preferences
Navigate to Print Properties
1.
Navigate to print properties.
•
In Windows 2000,
navigate: Start > Settings > Printers. The Printers dialog box opens.
•
In Windows XP and Windows Server 2003,
opens.
2.
Right-click on
Rimage Perfect Imager Printer PF.
3.
Select
Properties from the dropdown list. The Rimage Perfect Image Printer PF Properties window displays.
Set Ribbon Type, Media Type, and Print Strobe
1.
Navigate to Print Propertie
2.
Select the
Device Settings tab.
3.
Select the type of
Installed Ribbon.
Note:
The Double Print feature that is available with monocolor ribbons allows you to print the same label twice on
the disc. If you would like the printed areas on your discs to have more density, enable Double Print. Using Double
Print consumes more ribbon.
4.
Select the
Media Type.
5.
Set the
Master Print Strobe:
•
To achieve optimum print results for monocolor printing, set the Master Print Strobe to
•
To achieve optimum print results for color printing, set the Master Print Strobe to
•
To increase the print head life, set the Master Print Strobe to the lowest setting that provides satisfactory printing.
6.
Select
Enabled to Enable Color Sub-Strobes.
7.
Select
OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.
Set Color Options
You can print in one (monocolor) or more colors. Use these procedures to set up the Prism to print in color or monocolor.
Print in Monocolor
1.
Install a monocolor ribbon in the printer. Refer to
2.
Navigate to Print Propertie
3.
Select the
Device Settings tab.
4.
Select the
Installed Ribbon setting.
5.
Select
Monocolor from the dropdown list.
6.
Select the
Master Print Strobe setting and set the value from the table below.
Note:
These are recommended settings for Rimage-brand media.
Media Surface
Thermal-printable media
7.
If this is a standalone printer, disable the
8.
Select the
Media Type.
9.
Select
OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.
14
navigate: Start > Printers and Faxes. The Printers and Faxes dialog box
s.
Refer to page 14.
Change the Print Ribbon
s. Refer to page 14.
Print strobe setting
for black ribbon
325 - 400
Perfect Print option. This option is only available on select Rimage autoloaders.
350 ms.
425 ms.
on page 19.
Print strobe setting
for red ribbon
375 - 425
Print strobe setting
for blue ribbon
350 - 400
110635_J
Advertisement
Chapters
Table of Contents
