Memory Unit Type C (Sdram Module) - Ricoh Aficio CL5000 Setup Manual

Options

Memory Unit Type C (SDRAM Module)

R CAUTION:
1
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Be sure to touch a metal object be-
fore touching the Memory Unit to
discharge static electricity. Even a
small amount of static electricity
can damage the unit.
❒ Do not subject the Memory Unit to
physical shocks.
A A A A
Turn off the power switch, and
then unplug the power cable.
B B B B
Remove the dustproof filter cover
on the back of the printer. First,
lift the cover by holding the bot-
tom of it (A A A A ), and then remove it
(B B B B ).
28
C C C C
Remove the other dustproof filter
cartridge by lifting it up.
Important
❒ Do not shake the removed car-
tridge. It may cause dust to fall
off.
D D D D
Remove the two screws that are
fastening the controller board on
the back of the printer.
The removed screws will be used
ZESHK212J
in step
board.
J
to fasten the controller
ZESHK760J
ZESHK750J