Using The Output Guide - Ricoh Aficio CL5000 Setup Manual

P P P P
Set the output tray.
A Insert the output tray into the
F i n i s h e r i n t h e d i r e c t i o n
shown.
Note
❒ Be sure to insert it until it
stops. It does not work prop-
er l y u n l es s p r o p e rl y i n -
stalled.
B Attach the stoppers to the posi-
tions shown in the illustration.
Important
❒ The stoppers cannot be at-
tached if the output tray is
not installed properly.
Note
❒ After finishing installation,
you can check whether the
Finisher is installed properly.
Print the configuration page
from the "List/Test Print"
menu. If it is installed prop-
erly, you will see "Finisher"
under the "Options" list.
❒ If the Finisher is not installed
properly, reinstall from step
A
. If you cannot install it
properly even after reinstal-
lation, contact your sales or
ZESP071J service representative.
Reference
See "Using the Control Pan-
el" in the Administrator Ref-
e r e n c e f o r p r i n t i n g t h e
configuration page.

Using the Output Guide

When the print paper size is larger
than A4/letter, pull out the output
guide of the output tray. It will pre-
vent the paper from falling.
ZESP070J
Note
❒ Return the output guide into the
tray after printing.
SR780 (500-sheet Finisher)
ZESP505J
1
23