Installing The Memory Unit Type B (Sdram Module) - Ricoh Aficio AP3800C Setup Manual

Setting Up
L L L L
Stick label "3" above the handle
on the front of the 2000-sheet
Large Capacity Tray.
2
Note
❒ After finishing all installation
for printing, you can check
whether the 2000-sheet Large
Capacity Tray is installed prop-
erly. Print the Configuration
Page from the "List/Test Print"
menu. If it is installed properly,
you will see "LCT Tandem
Bank" under the "Options" list.
❒ If the Paper Feed Unit is not in-
stalled properly, reinstall from
A
step
properly even after reinstalla-
tion, contact your sales or serv-
ice representative.
Reference
See p.69 "Test Printing".
30
. If you cannot install it
Installing the Memory Unit
Type B (SDRAM Module)
Important
❒ Be sure to touch a metal object be-
fore touching the Memory Unit to
discharge static electricity. Even a
small amount of static electricity
can damage the unit.
❒ Do not subject the SDRAM Mod-
ule to physical shocks.
A A A A
ZDJP128J
Turn off the power switch and
unplug the power cable.
B B B B
Remove two screws that are fas-
tening the Controller Board on
the back of the printer using pro-
vided screwdriver.
Reference
S e e p . 2 2 "H ow t o Us e th e
Screwdriver".
The removed screws will be used
later to fasten the Con troller
Board.
ZDJP025J