M M M M
Set the dustproof filter cover that
you removed in step
sert the projections on the cover to
the holes on the printer (A A A A ), and
then push it down (B B B B ).
When the power is turned on, the
Printer Hard Disk will be format-
ted automatically.
Note
❒ After finishing installation, you
can check whether the Printer
Hard Disk is installed properly.
Print the configuration page
f r o m t h e " L is t /T es t P ri n t "
menu. If it is installed properly,
you will see "Installed" for
"Printer Hard Disk Drive".
❒ If the Printer Hard Disk is not
installed properly, you will see
"Not Installed". In such a case,
reinstall from step
not install it properly even after
reinstallation, contact your sales
or service representative.
Reference
See "Using the Control Panel" in
the Administrator Reference for
printing the configuration page.
Important
❒ Before using the new Printer
Hard Disk, you must make the
settings in [Accessories] of the
printer driver.
C C C C
. First, in-
ZESH218J
A
. If you can-
Printer Hard Disk Type 5000
1
35