Ricoh Aficio CL5000 Setup Manual page 47

I I I I
Attach the 802.11b Interface Unit.
Insert the end of the 802.11b Inter-
face Unit to the opening (A A A A ), and
then push down until it clicks
(B B B B ).
Confirm that the 802.11b Interface
Unit is firmly connected to the con-
troller board.
J J J J
Fasten the 802.11b Interface Unit
on the controller board using the
screws that you removed in step
G G G G
.
Use a coin to fasten them tightly.
K K K K
Insert the card slowly into the
802.11b Interface Unit with the la-
bel facing down and the uneven
black antenna surface facing up
until it stops.
ZESPK910J
L L L L
Adjust the controller board to the
top and bottom rails, and then
push in slowly until it stops.
Note
❒ When installing other options
on the controller board, do not
close the controller board, but
go to the steps for installing the
option.
ZESPK920J
Important
❒ The printer may not work prop-
erly if the controller board is not
set correctly.
802.11b Interface Unit Type A
ZESPK930J
ZESPK804J
1
43