Programs - Ricoh Aficio 240W Copy Reference Manual

D D D D
Adjust the bypass tray's paper
guides to the size of the paper.
E E E E
Insert the paper in the bypass
tray, copy side up.
The paper feeds in automatically
and copying starts.
Important
❒ Insert the paper evenly on both
sides and support it with your
hands until it feeds in.
Note
❒ To make multiple copies, insert
an additional sheet after each
feeds in.
❒ To set a rolled original, pull out
th e lower output auxiliary
guide to the front, and then
place the rolled original on it.
See p.18 "Setting Rolled Origi-
nals".

Programs

You can store frequently used copy
job settings in machine memory, and
recall them for later use.
The Program function includes the
following settings:
❖ ❖ ❖ ❖ Storing a program
To store frequently used settings.
❖ ❖ ❖ ❖ Deleting a program
AAJ512D
To delete a stored program.
❖ ❖ ❖ ❖ Recalling a program
To recall a stored program.
Note
❒ You can store up to 10 programs.
❒ You can only select the paper tray.
You cannot store a paper type or
size.
❒ If you store the settings in the pro-
gram sheet, you can create a list.
See p.114 "Program Record Sheet".
❒ Immediately after the machine is
turned on, after Copier Auto Reset,
AAJ513S or after the { { { { Clear Modes} } } } key is
pressed, settings are reset to stand-
ard or those stored in program No.
10. See p.84 "Change Init. Mode".
❒ Stored settings are kept even after
the power is turned off or the
{ { { { Clear Modes} } } } key is pressed. They
are cleared only when you delete
or edit them.
Basic Procedure
DRAFT 2003/11/12
2
27