Job Preset - Ricoh Aficio 240W Copy Reference Manual

Copying
❒ When the bypass tray is selected,
you can set Fine Directional Mag-
nification after scanning the origi-
nals.
A A A A
Press the { { { { Fine Direct. Mag.} } } } key.
The Fine Direct. Mag. indicator
lights.
2
B B B B
Adjust the horizontal ratio using
[-] and [+], and then press the { { { { #} } } }
key.
C C C C
Adjust the vertical ratio using [-]
and [+], and then press [OK].
After you set the correction values,
they are displayed on the screen.
Press Start key to
add copies
画面を差し替えます。
Note
❒ If you make a mistake, select the
ratio you want to change using
the 01 keys, and then adjust it
using [-] and [+].
22
❒ These settings also appear in
"Fine Ratio:Copier" settings in
System Settings. If they are ad-
justed in System Settings using
the screen, the setting will apply
to both.

Job Preset

The following Job Preset methods are
available (when the current copy job
is finished, your copy job will start
automatically):
❖ ❖ ❖ ❖ Job Preset (Standard Preset)
Use this function to set up the next
copy job and scan an original when
a copy job is in progress. When the
ABB543S
current copy job is finished, your
copy job will start automatically.
❖ ❖ ❖ ❖ Quick Preset
Use this function to scan the origi-
nal of the next copy job when eject-
ing copies from the copy output.
Job preset (Standard preset)
A A A A
Press the { { { { New Job} } } } key while the
message "
played.
B B B B
Make the settings for the copy job
you want to preset.
" is dis-
Copying...
DRAFT 2003/11/12
ABB544S