Programs; Registering Frequently Used Setting - Ricoh en5100wd Operating Instructions Manual

Programs

You can register frequently used settings in the machine memory and recall them for future use.
• You can register up to 10 programs for the scanner mode.
• Programs are not deleted by turning the power off or by pressing the [Clear Modes] key unless the
content is deleted or newly registered.
• The following settings can be registered to programs: Scan Settings, Original Orientation, File
Type, Store File, Preview, Reception Notice, Security (E-mail Encryption and Signature), and
Original Output Exit.
• Setting made on the simplified display cannot be registered to a program.

Registering Frequently Used Setting

To register frequently used settings in a program:
1. On the initial scanner screen, make the settings you want to register in a program.
2. Press the [Program] key.
3. Press [Program].
BLT014S
Programs
153