User Tools (Copier Features)
Accessing User Tools (Copier Features)
This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are made. See p.83
"Exiting User Tools".
❒ Any changes you make with User
4
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
Modes} } } } key is pressed.
Reference
For details about System Settings,
see "User Tools Menu (System Set-
tings)", General Settings Guide.
Changing Default Settings
Note
❒ When a key operator code is set,
the key operator code input dis-
play appears when changing the
default settings. Enter the regis-
tered key operator code before-
h a n d . F o r d e t a i l s a b o u t k e y
operator codes, see "Key Op.
Tools", General Settings Guide.
82
A A A A
Press the { { { { User Tools} } } } key.
The User Tools key indicator
lights.
B B B B
Press { { { { 2} } } } ([Copier Features]) using
the number keys.
C C C C
Enter the number of the menu
you want to select using the
number keys.
The relevant settings screen ap-
pears for the item selected.
Note
❒ If the item you want to select is
not displayed, press [↑ ↑ ↑ ↑ Prev.] or
[↓ ↓ ↓ ↓ Next] to scroll to it.
Reference
p.77 "User Tools Menu (Copier
Features)"
DRAFT 2003/11/12
ABB39S