Tailskirt Installation; Trailer Hitch; Trailer Hitch Removal; Trailer Hitch Installation - Club Car TURF 272 2005 Maintenance Service Manual

BODY AND TRIM

TAILSKIRT INSTALLATION

1. Installation is the reverse of removal. Tighten screws (7) to 55 in-lb (6.2 N·m) (Figure 4-7, Page 4-14 or
Figure 4-8, Page 4-15).

TRAILER HITCH

Read General Warning, Section 1, Page 1-1.

TRAILER HITCH REMOVAL

1. Turf 272/Carryall 272/XRT 1200:
1.1. Remove the tailskirt. See Tailskirt Removal on page 4-12.
1.2. Remove two 5/16-18 hex nuts (20), lockwashers (21), flat washers (22) and 5/16-18 x 1-inch bolts
(23) from hitch brace (10) and hitch frame (8) (Figure 4-7, Page 4-14).
1.3. Remove two 5/16-18 hex nuts (13), lockwashers (12) flat washers (11) and 5/16-18 x 1-inch bolts
(18) where the hitch frame (8) mounts to the vehicle frame and remove the hitch.

TRAILER HITCH INSTALLATION

1. Turf 272/Carryall 272/XRT 1200:
1.1. Reverse the trailer hitch removal process and tighten bolts to 15 ft-lb (20.3 N·m) (Figure 4-7,
Page 4-14).
1.2. Install the tailskirt. See Tailskirt Installation on page 4-13.

RECEIVER HITCH

RECEIVER HITCH REMOVAL

1. Carryall 472/XRT 1200SE:
1.1. Remove the tailskirt. See Tailskirt Removal on page 4-12.
1.2. Remove two 5/16-18 hex nuts (13), lockwashers (12), flat washers (14) and 5/16-18 x 1-inch bolts
(15) from the top of hitch (10) brace (Figure 4-8, Page 4-15).
1.3. Remove two 5/16-18 hex nuts (13), lockwashers (12), flat washers (14) and 5/16-18 x 1-inch bolts
(15) where the hitch frame (10) mounts to the vehicle frame and remove the hitch.

RECEIVER HITCH INSTALLATION

1. Carryall 472/XRT 1200SE:
1.1. Reverse the receiver hitch removal process and tighten bolts to 15 ft-lb (20.3 N·m) (Figure 4-8,
Page 4-15).
1.2. Install the tailskirt. See Tailskirt Installation on page 4-13.
2005 Turf/Carryall 272/472 and XRT 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
4
Trailer Hitch
Page 4-13