Installing the Printer Software
If you have a USB (Universal Serial Bus) port enabled on your computer, and if your
computer is running Windows 98, you can connect your PGL 12en printer to the USB
chain of devices.
Note: To connect the printer to the USB port of the computer requires a
certified USB cable. You will need to buy the USB 1.0 compliant cable.
1. Install PCL driver
2. Connect printer with
USB cable and
install USB driver
To operate your printer with Windows PC, you must install the
PCL printer driver. Place the CD-ROM in the CD-ROM drive and
perform the instructions on page 2.10.
1
Make sure that both the printer and computer are turned
ON.
Plug one end of the USB cable into the USB port on the
2
printer.
Plug the other end into the USB port on the computer.
3
4
The Add New Hardware Wizard dialog box appears. Click
Next.
➝
To PC
U
Y
P
USB C
SING
OUR
RINTER WITH A
B B . . 1
ABLE