Using Ps Driver - Olivetti PGL 12en Reference Manual

Using PS Driver

If you want to use the PS driver which were installed on your Macintosh computer, you must
install the PPD file to access your printer features and allow the computer to communicate with
your printer.
PPD file installation method is different for USB connection and the network connection.
Installing PPD file on the USB-connected Macintosh
C C . . 10
U Y P
SING OUR RINTER WITH
Follow the instruction as described on page C.4 to install
1
the PPD file on your computer.
2 Open the Macintosh HD and double-click Apple Extras.
3 Double-click Apple LaserWriter Software.
4 Double-click Desktop Printer Utility.
5 Select LaserWriter 8, and select Printer (USB) in the list
box. Then click OK.
Click the Change button in the USB Printer Selection
6
section. The name of your printer appears in the list.
7 Click PGL 12en, then click OK.
8 Click the Auto Setup button in the PostScript Printer
Description (PPD) File section.
If Auto Setup does not work properly, click Select PPD
and choose Olivetti PGL 12en.
9 When the setup is completed, click the Create button.
10 Click the Save button to save PGL 12en as a desktop
printer.
M
ACINTOSH