Printing On Both Sides Of The Paper (Manual Duplexing) - Olivetti PGL 12en Reference Manual

Printing on Both Sides of the Paper
If you can not see
Note:
Long Edge in the Type drop-
down list, set the Type box in
the Output Mode section to
Multiple Pages per Side or Fit
to Page.
To print on both sides of the paper (manual duplexing), you
must run the paper through the printer twice. You can print
using the top output tray (face down tray) or the rear output
tray (face up tray). Olivetti recommends using the top output
tray for light-weight paper. Use the rear output tray for any
heavy media or media that tends to curl when printed, such as
envelopes and card stock.
To print on both sides of the paper, you must use the
Note:
Multi-Purpose Tray for the paper input source. Load paper in
the Multi-Purpose Tray.
1 When you change the print settings from your software
application, access the printer properties. See page 5.2 to
access the printer properties.
From the Paper tab, select the paper orientation, source,
size and type.
Click the Output tab, then choose Long Edge or Short
2
Edge from the Type drop-down list in the Manual 2 Sided
Printing section.
(Manual Duplexing)
5 5 . . 7
P T
RINTING ASKS