Table of Contents
Advertisement
3
Locate the PS SIMM slot (the lower slot
on the left as shown) and the memory
SIMM slot (the upper slot) on the control
board. They are not interchangeable.
• To install the memory SIMM, continue
with Step 4.
• To install the PS SIMM, go to Step 6.
4
Hold the memory SIMM so that the
notch
and the connection point
1
are aligned with the slot as shown, and
insert the SIMM all the way into the
upper slot labeled DRAM MODULE at
a 45 degrees angle.
5
Rotate it up until it snaps into place.
6
Hold the PS SIMM so that the notch
and the connection point
with the slot as shown, and insert the
SIMM all the way into the lower slot
labeled FLASH-ROM MODULE at a 45
degrees angle.
2
1
1
are aligned
2
1
Memory and PostScript SIMMs
Memory
PS SIMM
DRAM MODULE
2
FLASH-ROM MODULE
DRAM MODULE
FLASH-ROM MODULE
DRAM MODULE
FLASH-ROM MODULE
2
DRAM MODULE
FLASH-ROM MODULE
H H . . 3
P
O
RINTER
PTIONS
Advertisement
Table of Contents
Troubleshooting
