Table of Contents
Advertisement
Remove the printed
paper, and reload them
into the Multi-Purpose
Tray with printed side
face down.
Manual duplexing
Note:
can cause the printer to
become dirty more quickly
and reduce print quality.
See "Cleaning the Printer"
on page 6.4 if the printer
becomes dirty.
Printing on Both Sides of the Paper (Manual Duplexing)
6
After the first side has been printed, remove the remaining
paper from the Multi-Purpose Tray and set it aside until
after you finish your manual duplexing job.
7
Gather up the printed pages, flip the stack, and then
straighten the stack before placing it back in the Multi-
Purpose Tray.
If you have selected the Face Up tray option at Step
Note:
3, the last page is placed on the top of the stack. Do not
rearrange the pages before reloading the pages to print the
second side. Your printer knows the stacked page order and
will print the corresponding second side for each page.
The following illustrations show how to put the paper back
into the printer.
(left edge toward
the printer)
Long Edge in the
Landscape orientation
(top edge toward
the printer)
Long Edge in the
Portrait orientation
8
You are prompted to reinsert the paper into the Multi-
Purpose Tray. Click OK on screen to start printing the
second side. The printer automatically prints only the even-
numbered pages.
(right edge toward
the printer)
Short Edge in the
Landscape orientation
(bottom edge
toward the printer)
Short Edge in the
Portrait orientation
P
T
RINTING
ASKS
5 5 . . 9
Advertisement
Table of Contents
Troubleshooting
