Olivetti PGL 12en Reference Manual page 167

Network Interface Card
5
Align the connector on the network card
with the connector on the control board.
Push the card firmly into the connector
until it is completely inserted in place.
6
Tighten the two screws as shown.
7
Tighten the two screws, then replace the
plate.
8
Reconnect the power cord and printer
cable, then turn the printer on.
For information on configuring and using the printer on a network environment,
Note:
refer to the documentation provided with the network card option.
H H . . 6
P O
RINTER PTIONS