Using Lpr/Port9100 Connection For Installation; Operations Required To Use This Function (For Administrators); Installing The Printer Driver By Automatically Detecting The Printer; In Windows 8/8.1/Server 2012/Server 2012 R2 - Olivetti d-COLOR P3100 Manual

3.2

Using LPR/Port9100 connection for installation

3.2 Using LPR/Port9100 connection for installation

Operations required to use this function (for administrators)

Configure the LPR/Port 9100 operating environment.
- When using port 9100:
Make sure that the RAW port number has been set. (In normal circumstances, you can use the default
settings.) For details on how to configure the settings, refer to page 1-42.
- When using the LPR:
Check that LPD is enabled. (In normal circumstances, you can use the default settings.) For details on
how to configure the settings, refer to page 1-41.
3.2.1

Installing the printer driver by automatically detecting the printer

In Windows 8/8.1/Server 2012/Server 2012 R2

You can install the printer driver by automatically detecting the printer on the network or by creating a new
port.
0 Administrator privileges are required to perform this task.
0
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
2
Display the printer window.
% In Windows 8.1, click [
[View devices and printers].
% In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Hardware and
Sound] - [View devices and printers].
% In Windows Server 2012/Server 2012 R2, open the Start window, then click [Control Panel] - [Hard-
ware] - [View devices and printers].
3
Select Add a printer.
The [Add Printer] wizard appears.
4
Select your machine from the list, then click [Next].
% If no printers are detected, restart this machine.
% Use the IP address to confirm the printer that you want to connect to.
% It may take some time to finish searching the entire list of printers.
5
Click [Have Disk...].
6
Click [Browse...].
7
Select the folder on the CD/DVD-ROM containing the desired printer driver, then click [Open].
% Select the folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver, PS driver, and XPS driver
8
Click [OK].
The [Printers] list appears.
9
Click [Next].
10
Follow the on-screen instructions to carry out operations.
% If the [User Account Control] window appears, click [Continue] or [Yes].
11
Click [Finish].
d-COLOR P3100
] in the Start window, then click [Control Panel] - [Hardware and Sound] -
3
3-5