Olivetti PGL 12en Reference Manual page 165

Memory and PostScript SIMMs
7
Rotate it up until it snaps into place.
8
Make sure that the SIMMs are secured in
place by the metal clips and pins on both
sides of the connectors.
9
Reconnect the power cord and turn the
printer on.
For PostScript driver installation and usage information on a Macintosh system,
Note:
refer to Appendix C, "Using Your Printer with a Macintosh." For PS printing on a
Windows system, refer to Appendix E, "Using Windows PostScript Driver."
H H . . 4
P O
RINTER PTIONS
DRAM MODULE
FLASH-ROM MODULE
pin
clip