Table of Contents
Advertisement
Installing Software from Diskettes
If you have more than one disk, insert the next disk and
7
click Yes. Repeat this step for a third disk if necessary.
8
When copying to diskettes has been completed, click
Close in the Copy to Floppy dialog box. Then click Exit in
the OLIVETTI PRINTER SETUP dialog box.
The instructions to install a PCL 6 printer driver, PPD file and
RCP are same. Take the following steps:
1
Insert the first diskette (if the selected software diskettes
are more than one) which contains the desired installation
software; PCL 6 printer driver, USB driver, PPD file or RCP.
2
From the Start menu, select Run.
3
Type A:\setup.exe in the Open box and click OK. (if
your floppy drive is not A, substitute the correct letter.)
4
Follow the on-screen instruction to complete the
installation.
Making Installation Diskettes
I
S
D
NSTALLING
OFTWARE FROM
G G . . 3
ISKETTES
Advertisement
Table of Contents
Troubleshooting
