Olivetti PGL 12en Reference Manual page 38

To open the rear output tray:
1
Open the rear door by pulling it down .
The cover functions as the output tray.
2
Pull the extender to extend the output
tray to its full-length position to hold
longer paper.
3
If you do not want to stack the printed
pages on the rear output tray, slide the
extender to its place and close the tray.
The pages will then stack on the top
output tray.
The capacity of the rear output tray
Note:
is the same as that of the Multi-Purpose
Tray. If the tray is overloaded with printed
pages, it may fall from the printer. Remove
the pages so that the tray is not overloaded.
Selecting the Output Tray
P M
RINT EDIA
4 4 . . 5