Table of Contents
Advertisement
Making Installation Diskettes
Shows the
number of disks
required to copy
the selected
component.
G G . . 2
I
S
NSTALLING
OFTWARE FROM
4
The Copy to Floppy dialog box appears.
Select the desired components you want to copy to the
diskette from the Select box. You can select PCL6 Printer
Driver, PostScript Printer Description file, USB Port Driver
and RCP.
Select the floppy disk drive you will use to insert the
diskette.
Shows the
path of the
selected
component.
5
Click Copy all disk images.
If you want to copy a portion of the selected component,
select the disk you want to copy in the Disk Images
window, then click Copy selected disk image.
6
When prompted, insert a blank, formatted diskette into
the floppy drive, and click Yes to copy the first diskette.
For multiple diskettes, when the first diskette is finished,
you are prompted to insert disk 2.
Make sure you label each diskette in order as you create
it: PCL printer driver, disk 1 of 3, etc.
D
ISKETTES
Select the
floppy drive you
will use.
Select the
component you
want to copy.
Advertisement
Table of Contents
Troubleshooting
