AC2000 802.11ac Wireless Access Point/Router WAC124
• Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the access point/router assigns IPv6 addresses to the
devices on your home network (the LAN).
10. (Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the access point/router's
LAN interface.
If you do not specify an ID here, the access point/router generates one automatically
from its MAC address.
11. Click the Apply button.
Your settings are saved.
Specify the Access Point/Router
Internet Settings Manually
58
User Manual