NETGEAR WAC124-100NAS User Manual page 163

AC2000 802.11ac Wireless Access Point/Router WAC124
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
6. Select the Enable Traffic Meter check box.
7. Select the Connection time control radio button.
The access point/router must be connected to the Internet for you to be able to
select the Connection time control radio button.
8. In the Monthly Limit field, enter how many hours per month are allowed.
The access point/router must be connected to the Internet for you to be able to
enter information in the Monthly Limit field.
9. In the Traffic Counter section, set the traffic counter to begin at a specific time and
date.
10. In the Traffic Control section, enter a value in minutes to specify when the access
point/router issues a warning message before the monthly limit in hours is reached.
This setting is optional. The access point/router issues a warning when the balance
falls under the number of minutes that you enter. By default, the value is 0 and no
warning message is issued.
11. Select one or more of the following actions to occur when the limit is reached:
• Turn the Internet LED to flashing green. This setting is optional. When the traffic
limit is reached, the Internet LED blinks green.
• Disconnect and disable the Internet connection. This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
Maintain and Monitor the Access
Point/Router
163 User Manual