NETGEAR WAC124-100NAS User Manual page 264

AC2000 802.11ac Wireless Access Point/Router WAC124
Table 3. WAC124 access point/router factory default settings (Continued)
Feature
Country/region
Channel
WiFi throughput mode
SSID isolation
SSID broadcast
Client isolation
20/40 MHz coexistence
Fragmentation length
CTS/RTS threshold
Preamble mode
Radio transmission power
Implicit beamforming
MU-MIMO
Airtime Fairness
Bridge mode
WPS
WPS capability
Router's PIN
Keep Existing Wireless
Settings
QoS
Internet access QoS
802.11e WMM
UPnP
Factory Default Settings and
Technical Specifications
Default Setting
North America: United States
Europe: Europe
Other continents: Varies by region
Auto. The available channels depend on the region.
Up to 300 Mbps at 2.4 GHz
Up to 1733 Mbps at 5 GHz
Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Enabled (applies to all WiFi networks)
Enabled (applies to each single network)
Disabled for the Wireless 1 network.
Enabled for the Wireless 2 and Wireless 3 networks.
Enabled
2346
2347
Long Preamble
100%
Enabled
Enabled
Disabled
Disabled
Enabled
Enabled. For more information, see Manage the WPS settings on page 222.
Enabled
Disabled
Enabled
Enabled
264 User Manual