NETGEAR WAC124-100NAS User Manual page 24

Ac2000 802.11ac wireless access point/router
Table of Contents

Advertisement

AC2000 802.11ac Wireless Access Point/Router WAC124
LED
Power
Internet
WiFi
4. Log in to the access point/router by using one of the following methods:
• Connect over WiFi. On a WiFi-enabled computer or mobile device, find and
connect to the access point/router's WiFi network.
The default SSID is NETGEAR-1. The default passphrase is sharedsecret. If you
already changed the default SSID and the default passphrase, use the new SSID
name and passphrase.
• Connect over Ethernet directly to the access point/router. Using an Ethernet
cable, connect the LAN port on your computer directly to any of the four LANs
port on the access point/router.
5. Launch a web browser and enter http://www.routerlogin.net in the address field.
The Smart Setup Wizard starts.
If the Smart Setup Wizard does not start, see Access point mode: You cannot log in
to the access point/router on page 253.
6. Follow the prompts.
If the access point/router does not connect to the Internet, see Troubleshoot Internet
browsing on page 258.
When the access point/router is connected to the Internet, the NETGEAR Business
page displays.
7. If the NETGEAR Business displays the ! A new firmware upgrade is available. Click
here to get it. button, do the following:
a. Click the ! A new firmware upgrade is available. Click here to get it. button.
The access point/router finds the new firmware information and displays a
message asking if you want to download and install it.
b. Click the Yes button.
Install and Access the Access
Point/Router in Your Network
Description
The Power LED lights solid green, then blinks green, and then lights solid green again
when the startup procedure is finished. This process takes about 90 seconds. If the Power
LED does not light at all, press the Power On/Off button on the back panel.
The Internet LED blinks green or lights solid green when the Internet connection is
established.
Note: The Internet connection is established during the Smart Setup Wizard process
(see Step 5).
The WiFi LED lights solid green.
24
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wac124Wac124-100uks

Table of Contents