NETGEAR WAC124-100NAS User Manual page 228

AC2000 802.11ac Wireless Access Point/Router WAC124
To set up the access point/router as a WiFi bridge to another access point/router,
WiFi router, or AP Internet connection:
1. Make a note of the WiFi settings of the other access point/router, WiFi router, or AP
that is connected to the modem.
You must know the SSID, WiFi security mode, WiFi password, and operating
frequency (either 2.4 GHz or 5 GHz).
2. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
3. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
4. Click the Login button.
The NETGEAR Account Login page displays.
5. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
6. Select ADVANCED > Advanced Setup > Advanced Wireless Settings.
The Advanced Wireless Settings page displays.
7. Scroll to the very bottom and select the Use other operation mode check box.
The Enable Bridge mode radio button displays.
8. Select the Enable Bridge mode radio button.
The bridge mode settings display.
9. Click the setup bridge mode wireless settings button.
The Wireless Settings pop-up window opens.
Manage the Advanced WiFi and
Radio Features
228 User Manual