NETGEAR WAC124-100NAS User Manual page 57

AC2000 802.11ac Wireless Access Point/Router WAC124
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
6. From the Internet Connection Type menu, select PPPoE.
The page adjusts. The access point/router automatically detects the information in
the following fields:
• Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the access point/router's WAN (or Internet) interface. The number after the
slash (/) is the length of the prefix, which is also indicated by the underline (_)
under the IPv6 address. If no address is acquired, the field displays Not Available.
• Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the access point/router's LAN interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
7. Specify the PPPoE settings for IPv6:
• Login. Enter the login name that your ISP gave you.
• Password. Enter the password for the ISP connection.
• Service Name (If Required). Enter a service name. If your ISP did not provide a
service name, leave this field blank.
Note: The default setting of the Connection Mode menu is Always On to provide
a steady IPv6 connection. The access point/router never terminates the connection.
If the connection is terminated, for example, when the modem is turned off, the
access point/router attempts to reestablish the connection immediately after the
PPPoE connection becomes available again.
8. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns these addresses.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
9. In the LAN Setup section, select an IP Address Assignment radio button:
Specify the Access Point/Router
Internet Settings Manually
57 User Manual