Table of Contents
Advertisement
AC2000 802.11ac Wireless Access Point/Router WAC124
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > USB Storage > ReadySHARE.
The USB Storage (Advanced Settings) page displays.
6. Select the FTP (via internet) check box.
The Link field shows the URL that you must enter from a remote device.
Admin password protection is enabled by default.
7. Click the Apply button.
Your settings are saved.
8. To limit access to the admin user, do the following:
a. In the Available Network Folders list, select a device.
If a single device is attached to the USB port, the radio button is selected
automatically.
b. Click the Edit button.
The Edit Network Folder page displays.
c. From the Read Access menu, select admin.
The default setting is All - no password.
d. From the Write Access menu, select admin.
The default setting is All - no password.
e. Click the Apply button.
Your settings are saved.
f. Click the Close Window button.
The pop-up window closes.
Router Mode: Manage Dynamic
DNS and FTP Access Through
the Internet
203
User Manual
Advertisement
Table of Contents
