NETGEAR WAC124-100NAS User Manual page 152

AC2000 802.11ac Wireless Access Point/Router WAC124
To view information about the access point/router and the IP and WiFi settings if
the access point/router is in router mode:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED.
The ADVANCED Home page displays.
The information in the heading of each of the four panes uses the following color
coding:
• Green flag. The settings are fine and no problems exist. For a radio, the WiFi
network is enabled and secured.
• Red X. A problem exists or the connection is down. For a radio, the WiFi network
is disabled or down.
• Orange exclamation mark. The access point/router cannot get an Internet
connection (for example, because a cable is disconnected), the WiFi network of
a radio is enabled but open (that is, it is unprotected), or another situation
occurred and requires your attention.
The following tables describe the fields of the panes.
Field
Router Information pane
Hardware Version
Maintain and Monitor the Access
Point/Router
Description
The access point/router hardware version, which is the model number WAC124.
152 User Manual