NETGEAR WAC124-100NAS User Manual page 158

AC2000 802.11ac Wireless Access Point/Router WAC124
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select Attached Devices.
Wired devices are connected to the access point/router with Ethernet cables. WiFi
devices are connected to the access point/router through the WiFi network, in either
the 2.4 GHz band or the 5 GHz band. VPN devices are connected over a VPN tunnel
to the access point/router.
The following tables describe the fields on the Attached Devices page.
Field Description
Wired Devices
Status If access control is enabled (see Allow or block device access to your network on page 83),
the access control status of the device in the network (Allowed or Blocked).
IP Address The IP address that is assigned to the device when it joined the access point/router network.
This address can change when a device is disconnected and rejoins the network.
MAC Address The unique MAC address, which does not change.
Maintain and Monitor the Access
Point/Router
158 User Manual