Mgbic-02 Specifications (1000Base-T; Gpim Specifications - Enterasys Matrix E1 Series Installation Manual

A.3.4

MGBIC-02 Specifications (1000BASE-T)

Table A-10 MGBIC-02 Specifications
Item
Supported Cable:
Type
Maximum Length
Connector
Data Rate
TX Output impedance 100 ohms, typical at all frequencies between 1 MHz and 125 MHz
RX Input impedance
A.4

GPIM SPECIFICATIONS

The optional GPIMs
mode fiber-optic (SMF) cable connection and, depending on the GPIM, are 1000BASE-EX,
1000BASE-SX, or 1000BASE-SX/LX compliant. The Gigabit Ethernet GPIMs meet or exceed
IEEE 802.3z standards.
Table A-11 GBIC Input/Output Port Specifications
Item
GPIM-01
GPIM-08
GPIM-09
Specification
Copper, Category 5 UTP
Up to 100 meters
RJ45
1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only
Automatic crossover detection
100 ohms, typical at all frequencies between 1 MHz and 125 MHz
(Table A-11) support Gigabit Ethernet multimode fiber-optic (MMF) or single
Specification
Provides one, 1000BASE-SX compliant SC fiber optic connection.
Supports multimode fiber optic cabling.
Provides one, 1000BASE-EX compliant SC fiber optic connection.
Supports single-mode fiber optic cabling.
Provides one, 1000BASE-SX/LX compliant SC fiber optic connection.
Supports single or multimode fiber optic cabling.
GPIM Specifications
Specifications A-7