Ethernet Expansion Module Specifications - Enterasys Matrix E1 Series Installation Manual

Table A-1 1G582-09 and 1G587-09 Specifications (Continued)
Item
Physical
Dimensions
Approximate Weight (Unit)
MTBF
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
A.2

ETHERNET EXPANSION MODULE SPECIFICATIONS

At the time of this printing, five Ethernet expansion modules were available from Enterasys
Networks. The following sections describe their input/output port specifications as follows:
Table A-2 Ethernet Expansion Module Input/Output Port Specifications
Item
1H-16TX
1H-8FX
1G-2GBIC
1G-2MGBIC
1G-2TX
Specification
Sixteen Fast Ethernet 10/100 Mbps (10BASE-T and 100BASE-TX compliant)
ports with fixed, Fast Ethernet RJ45 connectors.
Eight Fast Ethernet 100 Mbps (100BASE-FX compliant) ports with MT-RJ
multimode fiber optic connectors.
Two slots that can support two, or a combination of optional GPIM-01,
GPIM-08, and GPIM-09 interface modules for gigabit fiber optic SC
connections. For GPIM specifications, refer to
Two slots that can support two, or a combination of optional Mini-GBIC
interface modules for gigabit fiber optic MT-RJ, LC, or RJ45 connections.
For GPIM specifications, refer to
Two Gigabit Ethernet 10/100/1000 Mbps (10/100 in auto mode only;
1000BASE-T compliant) ports with fixed, Gigabit Ethernet RJ45 connectors.
Ethernet Expansion Module Specifications
Specification
8.9H x 44.45W x 44.0D (cm)
3.5H x 17.5W x 17.3D (in.)
8.75 kg (19.23 lb)
91,000 hours
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 90% (non-condensing)
Section
Section A.4
A.4.
Specifications A-3