Mgbic-08 Specifications (1000Base-Ex - Enterasys Matrix E1 Series Installation Manual

Mini-GBIC Specifications
Table A-7 MGBIC-LC09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF
A.3.3

MGBIC-08 Specifications (1000BASE-EX)

Table A-8 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 70 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached
segment. The Link Power Budget must not exceed those specified in this table. The MGBIC-08 input
power must not exceed -3 dBm. Otherwise, saturation could occur.
Table A-9 MGBIC-08 Operating Range
Item
9 or 10 µm SMF
A-6 Specifications
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dB
1550 nm
N/A
Modal Bandwidth @
1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
+2 dBm, typical
-26 dBm, typical
28dB, typical
Range
2-550 Meters
2-550 Meters
2-550 Meters
2-10,000 Meters
+5 dBm, max.
Range
80,000 Meters