Using The Shower - Mira Mode 1.1980.001 Installation And User Manual

Using the Shower

Note: The factory default maximum temperature is set to 45°C.
When you turn on the product and water begins to flow, the temperature indicator light will
begin to flash to show the product is warming up. Once the preselected outlet temperature
has been reached, the indicator light will stop flashing.
Temperature
Indicator
On/Off Button
Turns product On/Off.
Rotary movement selects
showering temperature
Shower Overhead
Symbol - (Top Button) –
Turns Product Overhead
On/Off.
Shower Handset Symbol
(Bottom Button) – Turns
Product Handset On/Off.
Rotary movement selects
showering temperature
On/Off Symbol
( To p B u t t o n ) – Tu r n s
Product Bath Fill On/Off.
Bath Symbol - (Bottom
Button) – Turns Product
Bath Fill Preset On/Off.
Rotary movement selects
bathfill water temperature
Shower Symbol - (Top
Button) – Turns Product
Shower On/Off.
Bath Symbol - (Bottom
Button) – Turns Product
Bath Fill Preset On/Off.
Rotary movement selects
showering/bathfill water
temperature
52