Table of Contents
Advertisement
Bathfill Preset Adjustment
For Products with a Bath Fill Shower Interface and Dual Shower/Bath fill Interface
Bath Fill Preset – Push down the plug in
the bath. Hold down the Bath Symbol Button
(bottom half) for approximately 5 Seconds
until the Bath Symbol Button flashes. Press
the Bath Symbol Button (bottom half) to start
the Bath filling. Rotate the Chrome Bezel to
adjust the temperature indicator to set the
temperature. On reaching the ideal fill level
and desired temperature, press the Bath
Symbol Button (bottom half) to stop the
water & save the Bath Fill Preset.
Note: Factory Default Bath Fill Preset
is 5 minutes duration at 42°C Inlet
Temperature.
Bath Fill Preset temperature will calculate
the average temperature over the Preset
fill duration & take into account adjustments
made to the User Interface rotary temperature
dial during this time period.
55
Advertisement
Table of Contents
