Using The Shower - Mira Advance User Manual

Using the Shower

Each time the shower is operated it will confirm its status
during the start-up process, confirming the mode setting and
when the temperature is reached. Note! Further temperature
adjustments during showering will not confirm temperature
has been reached.
Standard Mode
When starting in standard mode the product will beep
once when the start/stop button is pressed and the amber
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing
and the shower will beep to confirm
BEAB Mode
When starting in BEAB care mode the product will beep three
times when the start/stop button is pressed and the green
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing
and the shower will beep to confirm.
Starting from Cold
When starting the shower with temperature set in cold
position the product will beep once when the start/stop button
is pressed and the blue status light & white start/stop light
will pulse, when full cold flow is achieved the lights will stop
pulsing and the shower will beep to confirm. If the shower
temperature is adjusted to a higher temperature from cold
in either standard mode the amber status light or BEAB
mode the green status light will be indicated but there will
be no further indication to confirm set temperature has been
achieved.
5 1306246-W5-A