Table of Contents
Advertisement
Set Up: Controller
Maximum Temperature Setting with the User Interface
Single Outlet Shower
Temperature Indicator
Hold down the On/Off Button for approximately
10 Seconds until the Temperature Indicator
light pulses on/off.
Note: After 5 seconds the lights will pulse
to indicate pairing mode, you need to
continue to hold the button for the entire
10 seconds.
Adjust the temperature indicator in
accordance to the table below to set the
desired maximum temperature.
To remove the product from the connected
app account, turn the dial to full cold 'C'
position.
Temp Indicator Position
1 - 3
4 - 6
7 - 9
H
Caution! Make sure that the maximum
outlet temperature is suitable and safe
for all users.
Press the On/Off Button to set the maximum
temperature. The temperature indicator light
will flash twice to confirm the setting has
been completed.
Temp °C
41
45
48
Exit No Change
53
Advertisement
Table of Contents
