Shower Fittings - Ceiling Fed - Mira Vision Owner's Installation Manual

Shower Fittings - Ceiling Fed

Suitable for solid, dry-lined, stud partition, shower cubicle or laminated panel walls.
The Slide Bar should be fixed to the wall at a convenient height for all the family.
It should be positioned so that water sprays down the centre of the bath, or away
from the opening of a shower cubicle. Water should spray away from the Wireless
Controller when the Showerhead is held on the Slide Bar.
Decide on suitable position for Slide
Bar avoiding buried cables and pipes in
both wall and ceiling. Make sure slide
bar extension will fit through ceiling.
Ceiling hole centre can be altered to
avoid roof joists by using supplied
spacers.
Using template as guide, mark
positions of the fixing holes for Wall
Brackets (600 mm). Upper hole to be
no more than 645 mm from ceiling.
Note! Use spirit level to make sure
fixing holes are vertical.
Fold long end of template and move
up to ceiling. Using upper marked
fixing hole as guide, mark centre for
hole in ceiling.
Important! If supplied Slide Bar
spacers are required, centre
distance for hole will increase to
75 mm from wall.
Cut hole in ceiling 29 mm diameter.
m
5 m
6 4 x .
M a
m
0 m
6 0
23
Optional
spacers
(supplied)
1184347-W2-G