Table of Contents
Advertisement
Installation: Rear Fed Deluge Head
Fix at convenient height for all users. Position so that water sprays down the centre of the
bath, or away from the opening of a shower cubicle. Make sure that the water sprays away
from the interface and the showerhead.
1
Note: Make sure that the deluge head is not installed over the handshower.
2
The outlet pipe must protrude 18 mm
(± 2 mm) from the finished wall
surface and a minimum 35 mm from
the ceiling.
Note: Cut the pipe to the correct
length and remove any burrs.
Note: 15mm copper pipe must be used here.
38
Minimum Distance
to Ceiling 35 mm
18 ± 2 mm
3
Mark the positions of the backplate
fixing holes.
Caution! Be aware of hidden pipes
or cables.
For solid walls drill the fixing holes for
the backplate with a 6 mm drill and
insert the wall plugs (supplied). For
other types of wall structure alternative
fixings may be required (not supplied).
Advertisement
Table of Contents
