Ceiling Fed Shower Fittings - Mira Platinum Installation And User Manual

Installation: Ceiling Fed Shower Fittings
Fix at convenient height for all the family. Position the fittings so that water sprays down the
centre of the bath, or away from the opening of a shower cubicle. Water should spray away
from the user controller when the handshower is held on the slide bar.
1
Decide on suitable position for slide
bar avoiding buried cables and pipes
in both wall and ceiling. Make sure
chrome supply tube will fit through
ceiling. Ceiling hole centre can be
altered to avoid roof joists by using
supplied spacers.
Using template as guide, mark positions
of the fixing holes for wall brackets
(600 mm). Upper hole to be no more
than 645 mm from ceiling.
Note: Use spirit level to make sure
fixing holes are vertical.
2
Fold long end of template and move
up to ceiling. Using upper marked
fixing hole as guide, mark centre for
hole in ceiling.
Important! If supplied slide bar
s p a c e r s a r e r e q u i r e d , c e n t r e
distance for hole will increase to
75 mm from wall. This is to avoid
ceiling joists if necessary. Use the
supplied longer fixing screws if you
are using the spacers.
Drill a hole in the ceiling that is a
minimum Ø30 mm maximum Ø40 mm.
28
m
5 m
6 4 x .
M a
m
0 m
6 0
Optional spacers
(supplied)
Clamp bracket to
be positioned with
the buttons on left
side.