Cable Management Arm (Cma) Assembly Installation Procedure - Western Digital OpenFlex Data24 Installation Manual
Hide thumbs
Also See for OpenFlex Data24:
- User manual (101 pages) ,
- Manual (39 pages) ,
- Manual (44 pages)
Table of Contents
Advertisement
Installation
Guide
Figure 16: Locking the Retention Clip
e. Slide the retention clip forward until it stops near the cable connector. Doing this will ensure
that the retention clip functions properly in the event the cable is accidentally pulled.
Figure 17: Sliding the Retention Clip Forward
1.6 Cable Management Arm (CMA) Assembly Installation
Procedure
Install the cables into the CMA.
Step 1 :
1.6 Cable Management Arm (CMA) Assembly Installation Procedure
Note:
The cables will be routed through the CMA channels before installation of the
CMA.
1. Installation
16
Advertisement
Table of Contents
