3. Install the keyboard.
4. Install the
keyboard
lattice.
5. Install the
SIM
card.
6. Install the
primary
memory.
7. Install the
WWAN
card.
8. Install the
WLAN
card.
9. Install the
secondary
memory.
10. Install the
primary M.2
11. Install the battery.
12. Install the
base
cover.
13. Install the
secondary M.2
14. Install the
SD
card.
15. Follow the procedure in
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
heat-sink
About this task
The figure indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
Steps
1. Disconnect the power-adapter cable from the connector on the system board.
2. Peel and unroute the display cable from the route to access the power-adapter port slot.
3. Remove the (M2x3) screw that secures power-adapter port bracket.
4. Remove the power-adapter port bracket from the computer.
SSD.
SSD.
after working inside your
before working inside your
assembly.
computer.
computer.
Removing and installing components
77