2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
primary M.2
8. Remove the
inner
frame.
About this task
The figure indicates the location of the touchpad buttons and provides a visual representation of the removal procedure.
Steps
1. Disconnect the touchpad buttons FPC from the connector on the touchpad.
2. Remove the two (M2x2.5) screws that secure the touchpad buttons to the palmrest.
3. Remove the touchpad buttons from the palmrest.
54
Removing and installing components
SSD.