Power Button; Removing The Power Button - Dell P93F Service Manual
Hide thumbs
Also See for P93F:
- Service manual (102 pages) ,
- Setup and specifications manual (45 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
Steps
1. Connect the power button board FFC to the power button board.
2. Align and place the power button board with power button FFC into its slot on the computer.
3. Replace the (M2x3) screw to secure the power button board to the computer.
4. Adhere the power button board FFC to the palmrest.
5. Connect the power button board FFC to the connector on the system board.
6. Connect the power button board assembly with fingerprint reader FPC to the power button board.
7. Replace the power button board assembly with fingerprint reader FPC bracket above the power button daughter board.
8. Replace the (M2x3) screw to secure the power button board assembly with fingerprint reader FPC bracket in place.
Next steps
1. Install the
heat-sink
assembly.
2. Install the battery.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
heat-sink
64
Removing and installing components
after working inside your
before working inside your
assembly.
computer.
computer.
Advertisement
Table of Contents
