Dell P93F Service Manual page 71

12. Remove the keyboard.
13. Remove the primary memory.
14. Remove the heat-sink
15. Remove the inner frame.
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
The following image indicates the connectors on your system board:
1. Power button FFC connector
2. WWAN card connector
3. Darwin antenna cable connector
4. Secondary M.2 SSD connector
5. Fan cable connector
6. FPC beam connector
7. Display cable connector
8. IR camera/Touchscreen cable connector
9. Power-adapter port connector
10. Fan cable connector
11. Battery cable connector
12. Touchpad cable cpnnector
13. Secondary memory module slot
14. WLAN card connector
15. USH daughter board cable connector
16. SIM card slot
17. Primary M.2 SSD slot 3 connector
18. Primary M.2 SSD slot 5 connector
assembly.
Removing and installing components 71